Rack mounting extender/standoff
-
- Posts: 39
- Joined: 11 Sep 2013, 7:54pm
Rack mounting extender/standoff
Hi all, so I am wanting to mount a reflector onto my rack mount hole but need it extended slightly. Is there a extended standoff on the market anywhere that anyone knows of?
Re: Rack mounting extender/standoff
I would see what SJSC have got. There might be a Cateye product that does what you want.
I should coco.
-
- Posts: 39
- Joined: 11 Sep 2013, 7:54pm
Re: Rack mounting extender/standoff
I maybe didn't explain it very well! I don't have a rack. I want to use the rack mounting holes near chainstay to mount a light as when I have my bag attached to my klickfix seatpost mount my under saddle light will be covered. But due to the position of gear cables I can't get the light to fix there. What I want is something to work as a spacer or extender to allow me to use it. Any ideas?
-
- Posts: 1420
- Joined: 17 Nov 2009, 10:48am
- Location: near Afan
Re: Rack mounting extender/standoff
put a light/reflector on your bag?
--
Burls Ti Tourer for tarmac
Saracen aluminium full suss for trails.
Burls Ti Tourer for tarmac
Saracen aluminium full suss for trails.
Re: Rack mounting extender/standoff
Have a look at Cateye's offerings - they do all sorts of brackets and lights that you can buy separately. I have seen someone with two TL-LD610 mounted, one on each seatstay.
The lights were mounted vertically, and used different brackets to the one in the link, maybe something like the SP MODEL Flex Tight Bracket.
I think you can get the actual light holder bit separately, which you could then attach to your rack mounts with suitable spacers.
The lights were mounted vertically, and used different brackets to the one in the link, maybe something like the SP MODEL Flex Tight Bracket.
I think you can get the actual light holder bit separately, which you could then attach to your rack mounts with suitable spacers.
Re: Rack mounting extender/standoff
You mean the rack mount just above where a caliper rear brake normally sits? I think you may be able to use a front light bracket (meant to bolt to the fork crown) but with the (T or L shaped) plastic lamp mount bolted into it, suitable for your rear light.
something like this
£2.10
should work provided your rear light isn't too heavy.
cheers
something like this
£2.10
should work provided your rear light isn't too heavy.
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Rack mounting extender/standoff
Mudguard mounting is another option egs:
Battery: http://www.dutchbikebits.com/lights/spa ... rear-light or http://www.dutchbikebits.com/axa-retro-rear-light
Dynamo: http://www.rosebikes.co.uk/article/b--m ... tAodXHAIWQ
Battery: http://www.dutchbikebits.com/lights/spa ... rear-light or http://www.dutchbikebits.com/axa-retro-rear-light
Dynamo: http://www.rosebikes.co.uk/article/b--m ... tAodXHAIWQ
-
- Posts: 39
- Joined: 11 Sep 2013, 7:54pm
Re: Rack mounting extender/standoff
That thing from spa is just what I'm looking for I think!