Page 1 of 1

attaching mudguards to bikes not designed for it

Posted: 15 Jan 2012, 5:14pm
by Vladimir
Hey gyus,
I thought I'd show you how I went about attaching mudguards to my rockhopper; which is not designed to take them.
Basically I used P clips and some different screws (that span the larger distance).
Apart from sourcing the P clips of the correct diameter and a selection of screws, it was easy as!
For the rear mudguard, I had to place the stays assymetrically so that I can still put my pannier on.
The attachments for the rear mudguard that I didn't photograph was simply drill work and cable ties
Enjoy!
front mudguard:
spec1-800.JPG


back mudguard:
spec2-800.JPG

spec11-800.JPG