Stainless Steel Braze-ons

For discussions about bikes and equipment.
robc02
Posts: 1824
Joined: 23 Apr 2009, 7:12pm
Location: Stafford

Re: Stainless Steel Braze-ons

Post by robc02 »

Thanks to all for your suggestions.

The job is now done. I turned 6mm bore stops from 303 stainless steel, filed a small flat on one side and silver brazed them. They are long enough that the narrow part of the long Jagwire ferrules fits completely inside and the wider (6mm) part is just inside the stop. So I have the option of using either these or standard ferrules.
robc02
Posts: 1824
Joined: 23 Apr 2009, 7:12pm
Location: Stafford

Re: Stainless Steel Braze-ons

Post by robc02 »

Brucey
Posts: 44521
Joined: 4 Jan 2012, 6:25pm

Re: Stainless Steel Braze-ons

Post by Brucey »

robc02 wrote:Thanks to all for your suggestions.

The job is now done. I turned 6mm bore stops from 303 stainless steel, filed a small flat on one side and silver brazed them. They are long enough that the narrow part of the long Jagwire ferrules fits completely inside and the wider (6mm) part is just inside the stop. So I have the option of using either these or standard ferrules.


sounds good, I for one would love to see a photo if you have one

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
robc02
Posts: 1824
Joined: 23 Apr 2009, 7:12pm
Location: Stafford

Re: Stainless Steel Braze-ons

Post by robc02 »

I for one would love to see a photo if you have one


ChainstayStop.jpg

ChainstayStop2.jpg

TopTubeStop1.jpg

TopTubeStop2.jpg
Brucey
Posts: 44521
Joined: 4 Jan 2012, 6:25pm

Re: Stainless Steel Braze-ons

Post by Brucey »

nice!

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Post Reply