Oops, sheared bolt...

DIscuss anything relating to non-standard cycles and their equipment.
Post Reply
User avatar
[XAP]Bob
Posts: 19801
Joined: 26 Sep 2008, 4:12pm

Re: Oops, sheared bolt...

Post by [XAP]Bob »

eddiewalkling wrote:Nice one! I hope the rest goes well.

That must be a weight off your mind.

Still nervy ;)
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Top
Thomas125
Posts: 411
Joined: 23 Sep 2008, 6:50pm
Location: Telford, West Midlands

Re: Oops, sheared bolt...

Post by Thomas125 »

If you can get at both sides drill right through, tap hole, thread thinner bolt through opposite side lock off end with 2 nuts and then unscrew.
Was 93.4kg now 78.3kg

Next target 74.0kg

"Life is one long bike ride" :-)
Top
User avatar
[XAP]Bob
Posts: 19801
Joined: 26 Sep 2008, 4:12pm

Re: Oops, sheared bolt...

Post by [XAP]Bob »

The back end is sealed as part of the main frame.
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Top
Post Reply

Return to “Non-standard, Human Powered Vehicles”